在Internet上使用iDigi控制一盞燈
由馬特·理查森
5) 安裝的XBee互聯網網關
- Download and install the XBee Internet Gateway for your platform. Software installation instructions are available for Windows, OS X 和 Linux.
- Insert your XIG-labeled XBee into the USB Explorer and connect it to your computer. Be sure you’ve disconnected your CoolTerm session.
- Launch the XIG application, which will open your web browser and connect it to http://localhost:8000/. Choose the appropriate COM port and set the baud rate to 57600.
- If the power button in the upper right corner is red, click it so that it turns green and activates the XIG.
- Type in a description for your XIG and keep this page open for now, you’ll need to copy the Device ID into iDigi in the next step.
