Wireless Panel Meter

4) سیم تا مدار

• Place the XBee adapter into the breadboard.

• اتصال ترمینال VCC از آداپتور XBee به راه آهن مثبت و ترمینال زمین به راه آهن منفی.

• Connect + terminal of the panel meter through a 15k resistor to the PWM0 pin of the XBee breakout board, which is the 6th pin down on the left side. Connect the other terminal of the panel meter to ground.

• Insert the XBee into the breakout board and connect the power source.

• Your circuit should look something like the diagram above.